Jump to content

Knock sensor bad on 4Runner? I’m boned


bluto

Recommended Posts

6 minutes ago, Bevo&Pevo said:

Does any YouTube gurus have a fix or solution for this? It might give you a better idea of what you are up against.

Ya I’ve looked it over. No way in hell I can tackle it and seems like a tricky bitch beyond just the getting to it factor. 
 

put it into a repair estimator and it’s 3-4k on that.
 

taking it into Firestone to get diagnosed/eyes/camera on it. Never thought I’d be hoping for rodent damage but here I am. 

Link to comment
Share on other sites

1 hour ago, bluto said:

Any mechanic recs in central/east dallas? 
 

also wondering how much a dealership would bend me over on trade in if I just said f it. 2016 base model with 95k miles. Kbb says 20-25k depending on condition. 

Give me a sec and let me try and find my guy's number who used to work on my 4runner when I was living up there. He's the best. 

I'll shoot you a pm. 

  • Hook 'Em 1
Link to comment
Share on other sites

Waiting at Firestone now, initial dx is the battery is going bad/shorting which is tripping the sensor. It’s new battery from 5 yrs ago so quite possible/needing a new one around now anyhow. Good lord I hope that’s the case. 
 

Battery got it out of limp mode but the sensor is still effed for whatever reason. They want to replace it, tech saw the book called for 19 hours and he said that’s bs, he could do 5 hours which sounds more accurate. $1200 all in for it

Edited by bluto
Link to comment
Share on other sites

12 hours ago, elfenix said:

45 minute video on youtube.  so 19 hours is probably accurate.

Yeah out of curiosity I watched that same one, they’re buried in the v underneath the IM.  Notably that video didn’t include draining/refilling the coolant, and had me nervous about dropping a fastener into the engine at one point.  
 

Dude has quite the array of wrenches to get into some tight spots…I’d spend 19 hours just going back/forth to the hardware store and doing the job twice after my first attempt resulted in leftover parts.  
 

For $1200 I’d make sure both knock sensors were replaced as the job is all labor.  

  • Hook 'Em 2
Link to comment
Share on other sites

Good call on both there, I need to double check on oem (have seen that issue elsewhere) and they are def doing both sensors. Also having them flush coolant which makes sense timing wise. 
 

tech mentioned how Toyota is over the top with removing cylinder head to do this job and there are workarounds, as seen and done online. 

  • Hook 'Em 1
Link to comment
Share on other sites

Good call on both there, I need to double check on oem (have seen that issue elsewhere) and they are def doing both sensors. Also having them flush coolant which makes sense timing wise. 
 
tech mentioned how Toyota is over the top with removing cylinder head to do this job and there are workarounds, as seen and done online. 

This is pretty much it.

There is a Toyota specialist in mid-cities (I know, not Dallas), but it sounds like you’re on your way already.
Link to comment
Share on other sites

22 hours ago, bluto said:

Waiting at Firestone now, initial dx is the battery is going bad/shorting which is tripping the sensor. It’s new battery from 5 yrs ago so quite possible/needing a new one around now anyhow. Good lord I hope that’s the case. 
 

Battery got it out of limp mode but the sensor is still effed for whatever reason. They want to replace it, tech saw the book called for 19 hours and he said that’s bs, he could do 5 hours which sounds more accurate. $1200 all in for it

 

i wouldn't trust firestone 

Link to comment
Share on other sites

On 11/1/2022 at 10:51 AM, tbone_ said:

Also make sure they use correct OEM sensors. Off brands will still throw the check engine code. Ask me how I know this.

Called them back today “you’re using oem sensors right?” ‘We can use oem, we’ve never had bad luck with after market’

”ok, let me rephrase, you will use oem sensors on this job, there’s a dealership down the road that has them for 10% more than you’re charging me”

  • Hook 'Em 1
Link to comment
Share on other sites

Y’all only thought this was case closed… shop called me Saturday “fyi we cracked it open and got a direct look at the issue, it was rodent damage after all”

good news is insurance claim (less $500 deductible) is already in process and adjuster already got pics/estimate. Parts are on hand. 
 

bad news is wtf else did the fuckers gnaw on? Got half a mind to drive the thing straight from shop to dealership to trade it in before the next gremlin hits. Either way I’m grabbing a jug of peppermint/rodent repellant. 

  • Hook 'Em 2
  • Like 1
Link to comment
Share on other sites

My Tacoma engine light popped on out of the blue.  Advance Auto did a free diagnostic that IDed the “Bank 2 O2 sensor” as the probable culprit.

So I took it to a trusted mechanic who discovered several vacuum hoses chewed thru by rodents.  O2 sensor was good.  $10 parts, $100 labor .. and a free tip.

He told me to spray all rubber hoses and components under the hood with peppermint oil.  So I bought the concentrate at Home Depot, mixed with water per the instrx, and sprayed that shit all over every rubber hose/connection I could see.  I respray monthly assuming it loses potency.

Another tip.  Generac maintenance guy told me mice and ants are tough on generator wiring and electronics.  He told me to set a bag of mothballs on the battery and to put a fresh bag in at each annual service.  I also put a bag on my John Deere mower’s battery after a rat jumped from under the hood when I opened it to  check the oil.

Anyhow, if rodents are the problem …

Edited by VirginiaLonghorn
  • Hook 'Em 1
  • Like 1
Link to comment
Share on other sites

14 minutes ago, VirginiaLonghorn said:

My Tacoma engine light popped on out of the blue.  Advance Auto did a free diagnostic that IDed the “Bank 2 O2 sensor” as the probable culprit.

So I took it to a trusted mechanic who discovered several vacuum hoses chewed thru by rodents.  O2 sensor was good.  $10 parts, $100 labor .. and a free tip.

He told me to spray all rubber hoses and components under the hood with peppermint oil.  So I bought the concentrate at Home Depot, mixed with water per the instrx, and sprayed that shit all over every rubber hose/connection I could see.  I respray monthly assuming it loses potency.

Another tip.  Generac maintenance guy told me mice and ants are tough on generator wiring and electronics.  He told me to set a bag of mothballs on the battery and to put a fresh bag in at each annual service.  I also put a bag on my John Deere mower’s battery after a rat jumped from under the hood when I opened it to  check the oil.

Anyhow, if rodents are the problem …

Good shit and thx

  • Hook 'Em 1
Link to comment
Share on other sites

Hopefully this chapter is closed, got the whip back yesterday. $2150 cost all in for knock sensors and harness replaced. Insurance tabbed it at 1950 so they cut me a check for that less deductible. Credit to progressive, they had the estimate finalized/approved Tuesday after a Saturday claim filed.

 

off to Home Depot for rodent repellant! 

  • Hook 'Em 1
  • Like 1
Link to comment
Share on other sites

If it were me I’d also get a case of beer and my pellet gun, spend a few hours in the garage every weekend under the guise of ‘sorry honey I gotta care of the rodents’.  Hell if a rat showed up I might offer him a beer, and if declines my hospitality I’d start blasting before hanging his body on the 4Runner as a warning to the others…be cool or get capped. 

  • Hook 'Em 1
  • Haha 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...