Jump to content

LosIllini

Legacy Members
  • Posts

    163
  • Joined

  • Last visited

Reputation

90 Excellent

Recent Profile Visitors

1644 profile views
  1. I'm 15-20 miles from Cedar Hill- in M-Streets/ Lakewood. I have this antenna and booster in my garage, mounted on a shelf just below the ceiling, on a small Ram Mount ball mount, which makes it easier to position. Was a bit of a pita to dial-in- as it isn't set up very high, and has a brick wall/ wooden garage door to go through to go through. But, works and is easier than trying to tap into Coax in the attic. I am running the signal through an HDHomeRun Flex 4K ATSC 3 Tuner (fortunately, I have a centralized Coax and ethernet connected box in the garage), which is then connected to a PC Plex/ Video server I have set up, and allows me to DVR all the OTA channels via Plex or the Channels DVR app (which is really good, but doesn't run on Roku- only Android TV or Firestick). I get ~115 channels- all the networks, bunch of old tv show stations, randos, foreign, shopping, etc. There are currently only two 4K channels- Fox and Univision, but, Fox is a bit flaky (assuming content is upscaled, but, some of the college football games looked really good last fall). https://www.amazon.com/gp/product/B000FVTPX2 https://www.amazon.com/gp/product/B0B1237RTP The HDHomeRun isn't necessary if you don't want to DVR, and, if you want to split/ go straight to your TV antenna ins (assuming you have built-in OTA tuners on the TVs). Was a bit of trial and error getting things hooked up--- but, was well worth the setup.
  2. Didn't buy OEM parts- but, 3rd party with good ratings from Amazon. So, we'll see how long things last. Not exactly sure how old my Polaris is, but, it is at least 6 years old. 2.5 years sounds really short- would expect it to go longer before breaking down. So, hopefully minor repairs. One rebuild is probably worth it, and shouldn't cost you alot, assuming you don't have to do major surgery. ...pools and boats--- nothing cheap
  3. Just rebuilt my Polaris 280. Luckily it was pretty simple--- new wheel--- had a stripped gear, and new rubber for all the tires. Went ahead and replaced a couple of leaking swivels and the backup valve too. Found all the parts on Amazon. Some good vids on youtube. Ended up having to dial back in the hose floats, and adjust the back jet--- wasn't hitting all areas of the pool. Working like a champ the last few days.
  4. Dammit- total brainfart- i'll take my beating now. Just checked my tv. I was positive that when I put the Frame up, the bracket slid horizontally, the same as the aftermarket mount. But, alas, it's static--- you have to move the whole brackets. Boo. The aftermarket one I linked has the sliders. I still had the issue w/ the Frame where studs weren't 16" apart, so, the install wasn't symmetric. But, i was able to get it to work. Apologies!
  5. Yes- the receiver brackets do slide--- so that gives you movement anywhere along the track. The 38.5" was from the 2021-23 models, so it looks like they may have tweaked the dims a bit wider for 2024 (these are the widest left/ right screws, not the 4 vesa pattern mounts). When you get it on the wall, the brackets should click down and seat, and the upper portion of the tv should be flat on the wall when the magnets engage. So, if it is tilting down, you need to make sure it's fully seated- then it will click into place. I think they provided some sort of plastic spacers that are optional and will cause a gap--- i didn't need to use them. You'll enjoy the set--- and, much easier install than having to run electrical/ hdmi cables. FWIW- for those interested in a flat install for a non-Frame tv, i've had good luck w/ this mount in mine and my parents houses. Not as clean as the Frame, but, way closer/ flatter to the wall than the typical mounts we all already have. https://www.amazon.com/ynVISION-DESIGN-Bracket-Compatible-Samsung-2021-2023/dp/B0C3SCVP5T/
  6. I was fortunate when I installed my 55" Frame in my office- was able to hit two studs with 3" deck screws, and used a FlipToggle Toggle Bolt Anchor in drywall for a third point. One thing about your picture above w the blue lines drawn in, that I can't tell w/o seeing the exact measurements (and, hence, that may be the whole point). The flat mounts that attach to the wall, don't have to be symmetric to center, as long as the sliding receiver brackets match up to the width of the mounts on the back of the tv- which according to my template is 38.5" for a 75" tv. So, you could potentially move them over left and right to hit a stud (and not be centered/ symmetrical), and slide the receiver brackets to compensate/ get to the 38.5". Another thing I did (though it likely makes no difference, is bought some plastic flex conduit at homedepot to wrap the power/ video cable in). And, last comment- try puttinging the brackets together before mounting the tv, to make sure they 'snap' in place and fully seat. Neighbor had a heck of a time, and finally had to wide the receivers a bit w a screwdriver. Good Luck!
  7. One of my best purchases was a Dewalt drill/ impact drive combo set ~8 years ago that was on sale cheap at HD. They've been solid, and hooked me into the ecosystem. Since then have added a sawzall, hedge trimmer, chainsaw, and blower. Don't use super-heavy, but, all work well, build quality is good, and batteries have held up. Still have Toro/ Stihl yard equipment. My dad has Makita, which seem to be a bit more ergonomic than the Dewalt. Neighbor has Ryobi- lot off cool tools/ accessories. Uncle has Milwaukee. These days, I would guess most brands are pretty good. Probably good to have similar stuff so that you can swap batteries, but, mixing in cheaper stuff that you don't use as much works.
  8. That Sony looks great- no frills/ and built-in Bluetooth is a winner. I'm still rocking a ~2000 era Sony a/v receiver and some Boston Acoustics bookshelves in my garage. I'd also give nextdoor/ fb marketplace a quick check as well and see if anything pops up. I've seen some decent spec'd a/v receivers that people are getting rid of cheap ($50-$150 range). They would have a built-in phono pre-amp/ input, and bluetooth depending upon the age. Guessing a lot of folks are moving to Sonus/ soundbars these days and are downsizing from the old, bulky/ wired stuff.
  9. That's a good call on removing the battery. PITA, but, a hard reset fixes things a lot of times. Assuming that i'm looking at the correct board- the current Bios is listed as: Version 1811, 11.02 MB, 2023/10/16, so check that too. F2 or Del on boot, to get into the Bios...
  10. Pretty sure you want slots 2 and 4, which sounds like what you are using. A Few quick thoughts- is your bios up to date? did you double-check ram compatibility (likely is ok)? were the sticks purchased as a package for dual channel use? did you make sure the ram was seated/ clicked down? (i've had this happen before) How long did you wait? Are you getting error lights from the mobo? (sometimes it takes awhile to reboot, and on some mobos i think there is a 'retraining' mode. have you tried each new stick in slot 1 to make sure they work?
  11. Big fan of Podcast Addict on my android phone. I haven't tried this particular feed url - but, have had luck with a bunch of others.
  12. Haven't seen Lone Star / LS Light 12 or 24 pack longnecks for a long time in Dallas--- just 6 packs if you want bottles, and 12 or 30 pack cans. Always easy to find Lone Star cans here though.
  13. Good call on Mariano's- haven't been there in awhile. May do that, since it's close. E-Bar is good too. Drive by Manny's Uptown Tex-Mex on Mockingbird / Abrams all the time, but, still haven't tried it.
  14. Friends coming in with their kids from Chicago in a few weeks. Want to get them out for some good Texmex and Margaritas. Usual go to for company is Ojeda's, Chuy's or El Vecino, but, wondering if there is something different within striking distance of M-Streets/ Lakewood that would be good to check out? RIP- Matt's and Goose, not the best, but, always had a good time there too. And, saw C-Man's rec for Gonzales in the Ticket thread--- can't believe I've never been there--- play golf at Keeton every now and then. On my list now.
  15. We drove up from Illinois- fished in Ontario. Took Yuengling with us, and picked up some LaBatt's Blue for the camp. Beer in Canada is expensive! Left an 18 pack of Yuengling with our seaplane pilot- he was happy, as were the ladies in the office. They like beer. Grabbed some MGL and Spotted Cow in Wiscy at Target on the way back down. Still can't decide if MGL is really Mic Ultra or Utra Gold in a different can... Really is God's Country up there. Lotta fishermen on this board- Texas lakes and Gulf Coast- that would love to catch smallies, walleye, pike and muskie. Just need to do it. You can't beat the weather, or, the scenery.
×
×
  • Create New...