Jump to content

All Encompassing Mortgage and Real Estate Thread


UTPhil2006

Recommended Posts

5 minutes ago, jimmyjazz said:

Is this a reaction to the potentially negative connotation of "master"?  If so, it never even occurred to me.  (I don't care what they call it, I'm pretty sure most 3+ bedroom houses have one that's bigger than the others.)

Yep..

Quote

"Some of these changes are simply good faith exercises to demonstrate awareness of historic improprieties or inequities," said Associate Prof. of Business at the University of Houston - Downtown Dietrich von Biedenfeld.

"Particularly in the south, we've had master slave culture. So, on a plantation, you would have a master of that domain who would then exercise control and dominance over enslaved or indentured servants, and so historically, to say that the master lives in a certain place, then it's sort of creates a tone that minorities are excluded."

 

Link to comment
Share on other sites

13 minutes ago, Neonmoon said:

Had two really good months but now it’s dead. Back to ZJs. 

From fuse my #1 take away: 

Stop hoping to reap from the seeds you didn’t sew. 
 

Whatever is going on right now is an opportunity to sew seeds that you can harvest in the future. We have the time right now. 
 

be happy for the good two months and grind away. 
 

im talking to me as much as you, I promise. Congrats on the 2 good months. More than a lot can say right now. 

  • Hook 'Em 1
Link to comment
Share on other sites

4 minutes ago, Dbeasy said:

Is it fair to say that once there is some stability and signs that the Fed has stopped, shouldn’t the 30 year rate drop down to a more normal 1.5% spread from the 10 year?

More like 2% on the spread historically, but yeah- that would be the hope once the market reaches inflection point/stabalizes.  

Link to comment
Share on other sites

57 minutes ago, LCHorn said:

I'm starting to see a lot of similarity between MBS Highway and TexAgs...

Yeah- it’s annoying. I’d just as soon every update of his read lock you stupid motherfuckers, it’s awful out there. Every day brings some new fresh horror and is worse than the day before. What’s are you thinking floating?  Why haven’t you gotten a new job yet?  Things are bad in the sector and only going to get worse.  If you aren’t smart enough to get out prepare your cornhole it’s going to be terrible.

 

now that’s an update. 

  • Haha 2
Link to comment
Share on other sites

4 hours ago, Wulaw Horn said:

10 year at 4.995. It was down in the overnight trading- somewhat significantly- and I said to myself- self- is it possible we will see mortgage backed securities up for the first time in 10 days? 
 

haha. Hahahahaha. 
 

 

Recovered fairly solidly so far today. 

Link to comment
Share on other sites

11 minutes ago, Wulaw Horn said:

I just locked 3 and finished the last one literally 30 seconds before "reprice for the worse" email came. I now have nothing exposed in my pipeline (as of now). 

I have two fucktards who are arguing amongst themselves on what rate/points to choose and did not decide before the reprice

I told them this would happen. I can't wait to explain how it's worse now. 

  • Haha 1
Link to comment
Share on other sites

7 minutes ago, Neonmoon said:

I have two fucktards who are arguing amongst themselves on what rate/points to choose and did not decide before the reprice

I told them this would happen. I can't wait to explain how it's worse now. 

I had a guy I begged to lock at 6.99% last month. It’s 7.75% now. And getting worse. He got an extension on his construction loan so he can play the market for 3 extra months. Ughhhhhhh. 

  • Haha 1
  • Fuck Around and Find Out 1
Link to comment
Share on other sites

May not be the thread for it, but wife and I are looking for homes in far north Dallas area.  Lots of homes built in the 70s.  Found one with potential but the home looks like old people died in there.  Original everything.  Anyways, I’m assuming no one is going to offer them what they are asking for.  What can a 350-375k renovation get you?  Anyone for a renovation like this.  We’re working with a reputable builder and architect but they basically won’t give me an idea of what it would cost to get what we want.  Would 350k for a 3300 Sq home cover foundation, repairs, new plumbing/electrical, new roof, tearing down walls and ceiling, new floor, etc?  It’s too experimenting buy a home to tear down for a new build so now we are exploring the renovation route, an option I was dreading.

Link to comment
Share on other sites

3 minutes ago, victory88 said:

May not be the thread for it, but wife and I are looking for homes in far north Dallas area.  Lots of homes built in the 70s.  Found one with potential but the home looks like old people died in there.  Original everything.  Anyways, I’m assuming no one is going to offer them what they are asking for.  What can a 350-375k renovation get you?  Anyone for a renovation like this.  We’re working with a reputable builder and architect but they basically won’t give me an idea of what it would cost to get what we want.  Would 350k for a 3300 Sq home cover foundation, repairs, new plumbing/electrical, new roof, tearing down walls and ceiling, new floor, etc?  It’s too experimenting buy a home to tear down for a new build so now we are exploring the renovation route, an option I was dreading.

Depends on the finish outs, and several other variables. Did they cite why they wouldn’t give you at least a baseline number so you have an idea of what to go to the lender for approval for?

Link to comment
Share on other sites

2 minutes ago, victory88 said:

May not be the thread for it, but wife and I are looking for homes in far north Dallas area.  Lots of homes built in the 70s.  Found one with potential but the home looks like old people died in there.  Original everything.  Anyways, I’m assuming no one is going to offer them what they are asking for.  What can a 350-375k renovation get you?  Anyone for a renovation like this.  We’re working with a reputable builder and architect but they basically won’t give me an idea of what it would cost to get what we want.  Would 350k for a 3300 Sq home cover foundation, repairs, new plumbing/electrical, new roof, tearing down walls and ceiling, new floor, etc?  It’s too experimenting buy a home to tear down for a new build so now we are exploring the renovation route, an option I was dreading.

Thats kind of like asking how much a car costs. 

Link to comment
Share on other sites

13 minutes ago, UTPhil2006 said:

Depends on the finish outs, and several other variables. Did they cite why they wouldn’t give you at least a baseline number so you have an idea of what to go to the lender for approval for?

So currently I’m approved for a jumbo loan and then a slightly smaller 100% no pmi loan.  Initially we were using the jumbo loan to buy a turn key flipped house but it had lots of issues for the price.  Plan is now to go with the 2nd loan and use cash on hand to renovate a home with “good” bones whatever that means.  Just don’t want to get stuck buying a shit home and the be told it will cost 500k when we’re telling the builder the most we are willing to spend.

for reference.  Here is the home we are looking at.  Hoping we can get it for 650-675k.  This home is priced way too high.  Other homes that are flips with updates are selling for slightly higher than this haunted home.  I imagine this home will need everthing redone.

https://www.zillow.com/homedetails/16311-Fallkirk-Dr-Dallas-TX-75248/26875285_zpid/

Would like the finishes to look somewhat like this images below.  The same builder and architect the home in the pictures in my good friends neighborhood.  Doesn’t have to be as high end but curious if this is even achievable.  Builder initially was saying we can do a lot but I’m not believing it….
 

 

 

IMG_9879.png

IMG_9878.png

Edited by victory88
Link to comment
Share on other sites

9 minutes ago, Blotto said:

Thats kind of like asking how much a car costs. 

I know man.  That’s why I’m asking.  Hard to get any information online and builder and architect keep telling me they won’t give me a quote till after inspections.  I just don’t want to shell out option money and inspection money again to be told it’s too pricey.  That shit adds up quick when you do it multiple times.  Just looking for feedback.  If anyone has done similar projects and what it cost them.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...