Jump to content

The Gun Owner’s thread


BigDHornfan

Recommended Posts

On 1/8/2021 at 8:04 AM, crimsonlonghorn said:

Any recommendations for glass for my new AR-10 in .308? Planning just to have it on hand for pigs on the farm mostly under 100 yards. 

Thinking about this one (, but I'm not an optics guy so I'm open to suggestions from someone who knows more than me. 

https://www.trijicon.com/products/product-family/trijicon-accupower-RS27

Trijicon makes incredible ruggedized optics.  Their conventiontal stuff is overpriced.  For the cost of that scope there, you can get a lot of other things that are better.

 

This is what I covet:

https://www.trijicon.com/products/product-family/trijicon-vcog-VC18

Link to comment
Share on other sites

On 1/8/2021 at 8:04 AM, crimsonlonghorn said:

Any recommendations for glass for my new AR-10 in .308? Planning just to have it on hand for pigs on the farm mostly under 100 yards. 

Thinking about this one (, but I'm not an optics guy so I'm open to suggestions from someone who knows more than me. 

https://www.trijicon.com/products/product-family/trijicon-accupower-RS27

Cool scope I went a different direction and a smaller budget because I was thinking more about longer range shooting 100+

So I got a 4-14 FFP  https://www.opticsplanet.com/primary-arms-primary-arms-4-14x44mm-riflescope-acss-hud-dmr-308-reticle.html

Link to comment
Share on other sites

Well, back to basics for me...
Somebody re-did the 1851 Navy - made in 1861 - Into a shooter long before I acquired it 52 years ago. The smooth action locks up tight and the bore is very good. Never have shot it though.
 
6F51F091-B840-425F-84A9-CA12B25C216F.thumb.jpeg.bfbf914ca8ef51b36534b0c3b6610310.jpeg

THAT is some wheel gun porn. If your gunsmith OKs it, you have to shoot it and have your g-g-g-g grandkids tic-toc the event. (It’s like a daguerrotype that moves brat)

Oh - my kids are related to Samual Walker from my ex’s side.
  • Like 3
Link to comment
Share on other sites

Lol "certain Springfield branded pistols (originally made in Croatia) are really great."

I posted this on the old board: I got a Croatian made Springfield two tone handgun with a 5in bbl, frame safety and its amazing. They don't make these any more for some reason - I've checked. The manual of arms of a 1911 but lighter, 13+1, and it actually runs. It'll even cycle rat shot for snake eliminating. Dead-on-balls accurate. My favorite handgun. It lives inder my right elbow in the truck center console every day. I would Fn cry like a 6yo girl with a skinned knee if it ever got stolen. But it's the handgun I'm most confident in connecting with and I keep it where shit is most likely to go down.

FU Jack Dorsey, Bezos, Bill Gates and Zuck. I won't be silenced about these Croatian made devices from Springfield!

Link to comment
Share on other sites

Isn't it crazy that outside of varying manufacturing changes and assembly methods firearms designs have changed very, very little over decades.  The material they are made of obviously changed as have optics, but little else.  Gas operated recoil systems date back to the 1850's.  

Link to comment
Share on other sites

4tq7nq.jpg

Can’t believe I’m letting y’all in on my plug...

https://www.gorillaammo.com/product-category/view-ammo-by-caliber/300-blackout-view-ammo-by-caliber/

They’ve lowered their round counts but it’s still about $1.50 ppr on the hunting rounds, which isn’t the worst considering everyone else is selling range ammo at 1.25-1.40 ppr.

I last ordered a 170 count bucket but now they are 160.

Also:
https://www.freedommunitions.com/ammunition/rifle/300-aac-blackout.html
Their prices have gone up a as well. Last month I was paying 1.3ppr after shipping etc
  • Like 1
Link to comment
Share on other sites

I have had good experience with Freedom prior to the market implosion.  

Yeah their .308 a-Max 178gr had been solid but now it’s always sold out. I like it better than just about everything that isn’t Federal Fusion 180gr.

Gorilla has been solid for me as well, I switched from a-Max to the Lehigh pig punisher after somebody in here recommended that over the a and v Max
Link to comment
Share on other sites

Last I looked into them, if you are gonna do it legally, the ATF considers the shell of the filter itself to be a serial numbered part that cannot be replaced, only repaired. So I'm guessing that your $200 tax stamp is a pretty poor investment. On the other hand, you are looking at a lot of parts that have legitimate uses outside of suppressors, so just owning the parts would be an expensive way to possibly show them who is boss without any real benefits unless you just want to be an outlaw.

Link to comment
Share on other sites

Im sure its been discussed, but have yall seen the facebook ads for "fuel filters" that are actually suppressors? Amazing they are doing that.

And more amazing people are buying them. You punch your name and address in to a computer for a class 3 item you are buying illegally.


The oil filters take an adapter. The adapter is the Nfa part.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...