Jump to content

Baltimore Bridge Disaster


tx 3 putt

Recommended Posts

8 hours ago, Biff Tannen said:

It’s so weird how the same psychotic idiots keep showing up in DT threads, spouting conspiracy theories, get roundly rejected and mocked, and then show up again in similar threads. Fuck you internet, fuck you. 

They have a promising future in elected office

Link to comment
Share on other sites

11 hours ago, Biff Tannen said:

It’s so weird how the same psychotic idiots keep showing up in DT threads, spouting conspiracy theories, get roundly rejected and mocked, and then show up again in similar threads. Fuck you internet, fuck you. 

Boat carshes hitting close to home now

Chinese cyber attacks zeroing in on aggy (the real super power in America)

everyone at TAMUG are stuck unless they gotta boat ride

image.thumb.png.eda20e289e1e5700dc56a3c3a64a288d.png


https://www.facebook.com/share/p/f23jheC7Vk58X1J8/?mibextid=K35XfP

Link to comment
Share on other sites

12 hours ago, Zeus said:

There's someone, somewhere, with a mullet and a trailer-adjacent proximity saying to himself, I can make that shit fit in my leased Dodge TRX

Quote

55,626-hp (41,480-kW) diesel engine manufactured by Hyundai

 

  • Haha 1
Link to comment
Share on other sites

21 minutes ago, Redneck Mutha said:

"Terrorists from tu destroyed the bridge, cutting off the food supply to those poor, brave, starving Aggies who are left to defend Pelican Island, much like William B Travis and Mike McKinney at the Alamo!"

-The Battalion, 5/16/24

P.S. Send more sheep! 

  • Haha 8
Link to comment
Share on other sites

Maybe doesn’t need its own thread but it’s national news. My uncle in Canada just texted me asking about oil spill in the river by us lol. 
 

it’s the bay

 

 but yeah a little more pollution to our little piece of paradise here in Galvatraz island

 

i dont see a huge amount of oil or anything from the drone

 

 

 

 

dji_fly_20240515_140102_198_1715799738530_photo_optimized.jpeg

dji_fly_20240515_140108_199_1715799745307_photo_optimized.jpeg

Link to comment
Share on other sites

23 minutes ago, Zeus said:

Maybe doesn’t need its own thread but it’s national news. My uncle in Canada just texted me asking about oil spill in the river by us lol. 
 

it’s the bay

 

 but yeah a little more pollution to our little piece of paradise here in Galvatraz island

 

i dont see a huge amount of oil or anything from the drone

 

 

 

 

dji_fly_20240515_140102_198_1715799738530_photo_optimized.jpeg

dji_fly_20240515_140108_199_1715799745307_photo_optimized.jpeg

If there’s an oil spill in Galveston can anyone even tell?  The answer is no evidently.  

  • Hook 'Em 1
  • Haha 3
Link to comment
Share on other sites

25 minutes ago, Hook1997 said:

If there’s an oil spill in Galveston can anyone even tell?  The answer is no evidently.  

It's all fun and games until you are picking tar balls off your surfboard and your kids feet.

 

  • Like 2
Link to comment
Share on other sites

4 minutes ago, Zeus said:

It's all fun and games until you are picking tar balls off your surfboard and your kids feet.

 

Interestingly enough, I grew up going to Galveston-area beaches, and every house had bottles of rubbing alcohol to remove the frequent tar stains.  And over the past 20 years, we grew up taking our kids down to the Texas coast, and when my daughter was maybe 10, she spotted a small spot on her foot -- "what is that?"  Oh, it's a little tar stain.  She freaked, we laughed - told her it was a regular thing when we were kids.

The Oil Pollution Act back in the 70s really DID make a big difference.

Also, I fished more than a time or two at Seawolf Park back in the day.  My daughter hooked a massive black drum on her little Barbie fishing rod setup one time down there.....it was not up to the task.

Link to comment
Share on other sites

Posted (edited)
2 hours ago, BabaYaga said:

There's someone, somewhere, with a mullet and a trailer-adjacent proximity saying to himself, I can make that shit fit in my leased Dodge TRX

 

An interesting note from the report.  That diesel and single prop/screw apparently are direct drive because it notes that to reverse, the engine must be stopped and restarted.

I'm not a marine engineer, but stopping and restarting one of those gigantic marine diesels is a non-trivial endeavor.  

 

Many other vessels use reduction gearing that includes a reverse gear.

I think this means that this vessel effectively had no practical means to reverse itself, or to steer sharply by reversing some engines.  The thruster(s) in the bow may obviate that to some degree, but not completely, and that of course requires pretty much full electrical power.

Edited by TwiceHorn
  • Like 1
Link to comment
Share on other sites

7 minutes ago, Brisketexan said:

Interestingly enough, I grew up going to Galveston-area beaches, and every house had bottles of rubbing alcohol to remove the frequent tar stains.  And over the past 20 years, we grew up taking our kids down to the Texas coast, and when my daughter was maybe 10, she spotted a small spot on her foot -- "what is that?"  Oh, it's a little tar stain.  She freaked, we laughed - told her it was a regular thing when we were kids.

The Oil Pollution Act back in the 70s really DID make a big difference.

Also, I fished more than a time or two at Seawolf Park back in the day.  My daughter hooked a massive black drum on her little Barbie fishing rod setup one time down there.....it was not up to the task.

Yeah even when I was a kid in the 90s there was way more out there, always finding chunks on the beach.

I found a few after that deepwater horizon spill but not really bad at all.

Haven't had too much bad shit in Galveston in quite a while, not even another big seaweed die off like we had a few years ago that caught up a bunch of little fish that died and stunk up the beach. 

75746_052314-ktrk-5pm-seaweed-vid.jpg

 

Link to comment
Share on other sites

6 minutes ago, TwiceHorn said:

An interesting note from the report.  That diesel and single prop/screw apparently are direct drive because it notes that to reverse, the engine must be stopped and restarted.

I'm not a marine engineer, but stopping and restarting one of those gigantic marine diesels is a non-trivial endeavor.  

Many other vessels use reduction gearing that includes a reverse gear.

I think this means that this vessel effectively had no practical means to reverse itself, or to steer sharply by reversing some engines.  The thruster(s) in the bow may obviate that to some degree, but not completely, and that of course requires pretty much full electrical power.

I guess the anchor drop brake needed manual release or power as well and even though they started dropping it 2 mins before they hit the bridge it wasn't down and catching or didn't catch enough to stop them. 

Link to comment
Share on other sites

All those three-eyed fish are about to grow a fourth eye. 

I rag on Galveston a lot but I will point out that even early Spanish explorers would find tarballs because of the naturally occurring oil in the area.  In theory, Galveston's water is actually semi-okay but good Lord. I can't even imagine what's in the ship Channel

  • Hook 'Em 1
Link to comment
Share on other sites

  • 3 weeks later...
Quote

The main shipping channel into Baltimore’s port has fully reopened to its original depth and width following the March 26 collapse of the Francis Scott Key Bridge, which blocked most maritime traffic into the harbor.

Officials announced the full reopening in a news release Monday evening. It comes after a massive cleanup effort as crews removed an estimated 50,000 tons of steel and concrete from the Patapsco River.

The channel was blocked by wreckage of the fallen bridge, which collapsed after a container ship lost power and crashed into one of its supporting columns, sending six members of a roadwork crew plunging to their deaths. All of the victims were Latino immigrants working an overnight shift to fill potholes on the bridge.

The Port of Baltimore, which processes more cars and farm equipment than any other in the country, was effectively closed for several weeks while the wreckage was removed. Crews were able to reopen portions of the deep-draft channel in phases, restoring some commercial traffic in recent weeks.

On May 20, the wayward cargo ship Dali was refloated and guided back to port. The vessel had been stuck amid the wreckage for almost two months, with a massive steel truss draped across its damaged bow.

After the Dali was moved, crews opened a channel that was 50 feet (15 meters) deep and 400 feet (122 meters) wide. The full federal shipping channel is 700 feet (213 meters) wide, which means two-way traffic can resume, officials said. They said other additional safety requirements have also been lifted because of the increased width.

Thousands of longshoremen, truckers and small business owners have seen their jobs impacted by the collapse, prompting local and state officials to prioritize reopening the port and restoring its traffic to normal capacity in hopes of easing the economic ripple effects.

The announcement Monday means the commerce that depends on the busy port can begin ramping back up.

Its a start, anyway. So much crazy shit happens these days, this event seems like it was at least 6 months ago. 

Link to comment
Share on other sites

honestly that sounds like a bullshit timeframe set up by a Chief Engineer named Scotty, so that he could tell his Captain that the ship was repaired 6 hours earlier than he said.

3.5 years is bullshit. hell they rebuilt the I35 Minneapolis bridge in a year and that was a complete tear down, start from scratch rebuild.  Im not saying the bridge can be built in a year. but 2 seems doable.

 

The bridge design wasnt that fucked up, honestly, if it only had deflector piers on both sides of the main legs, those would have kept the ship from hitting the pier at full force, and maybe even redirected the ship away entirely (with a big hole in it)

Other than the pier that was hit by the ship, the other piers should still be structurally sound. All they might need to do is sink some caissons around those piers to pump out the water, dig deep alongside the existing pier, and then expand the bulk weight of the pier with eleventy billion tons of conrete around them, and set up deflector piers on both sides to keep the accident from happening again.

The bridge was decently designed. use the blueprint already set out to rebuild the bridge.  add in more safety features... maybe see if its possible to raise to roadway another 50 feet or so to allow the biggest ships into the harbor and run with that on a 24/7 build schedule 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...